(1) Compression connection. Compression connection, also known as crimping, is a non-removable connection method. It is a process in which a special tool is used to apply pressure to the connected hardware and conductors, and plastic deformation is generated by the compressive stress, so as to connect the conductors and the connecting hardware.

(2) Mechanical connection. The method of connecting the conductor and the connecting hardware by the pressure generated by the tightening bolt, the torsion spring or the wedge-shaped structure of the hardware itself is called mechanical connection. This connection method is removable. The advantage of mechanical connection is that the process is relatively simple and can be applied to live work. The metal used for mechanical connection sometimes has a threaded structure, which can "bite" the surface of the conductor tightly when the bolt is tightened, so as to obtain good mechanical and electrical properties.

(3) Solder connection. Soldering connections are the ancient method of connecting conductors. Use tin-plated connecting pipes and outlet stalks with openings or pouring holes, and fill molten solder (50 percent lead and tin) between conductors, stubs or outlet stalks to complete the conductor connection. Solder connections are only suitable for copper conductor connections.
The disadvantage of soldering connection is that when a short-circuit fault occurs, the allowable temperature is only 160 degree . If the temperature is too high, the solder will melt and lose, and even the joint will be desoldered.

(4) Fusion welding connection. Fusion welding is a method of using welding equipment to generate high temperature to melt the conductors to achieve connection. The advantage of fusion welding is that it does not increase the diameter of the conductor at the connection, which is especially suitable for making flexible cable joints. The argon arc welding connection technology used for the connection of large-section aluminum core cable conductors is a fusion welding connection. Because the argon arc welding connection process is more complicated, special welding equipment is required, and the technicians need to be specially trained, this process is rarely used.
A relatively simple fusion welding connection technology is called thermite fusion welding, also known as "flux-coated welding". This fusion welding method does not require welding equipment, but uses granular copper oxide and aluminum placed in a special mold. After ignition, a violent chemical reaction occurs, producing copper and aluminum oxide, and at the same time releasing a lot of heat.
Its chemical reaction formula is:

This chemical reaction can rapidly raise the temperature in the special mold to around 2500 degree , thereby forming liquid copper, welding the cable conductors, and the alumina slag floating on the surface. When operated, this fusion welding technique produces a choking fumes that must be dissipated by forced exhaust.






